PRODUCT SPECIFICATIONS
| Product Code | STERSNNDA1 |
| Brand | Terumo |
| Country of Origin | China |
| Material | Medical-Grade Stainless Steel |
| Closure Type | Removable Safety Cap |
| Packaging | Box of 100 Needles (Individually-Wrapped) |
| Graduation | Not Applicable |
| Sterility | Yes, by ethylene oxide (EO) |
| Product Synonyms | Syringe Tip Needle, Disposable Syringe Needle, Hypodermic Needle, Luer Needle |
| Common Uses | General: For liquid sampling, transfer and dispensing using compatible syringes, etc. Chemical: For dispensing and transferring compatible liquids using a syringe, controlled addition of reagents, etc. Analytical: For transferring approximate volumes of liquids, sample preparation, etc. Food: For sampling and transferring liquid food samples, extracts and other compatible liquids, etc. Medical: For use with compatible syringes for injection, aspiration or medication administration, etc. |
INDIVIDUAL VARIANT SPECIFICATIONS
| Variant Product Code | Variant | Needle Diameter | Needle Length | Colour |
|---|---|---|---|---|
| STERSNNDA11838 | 18G, 1.5″ (38 mm) | 1.2 mm | 38 mm | Pink |
| STERSNNDA11938 | 19G, 1.5″ (38 mm) | 1.1 mm | 38 mm | Cream |
| STERSNNDA12025 | 20G, 1″ (25 mm) | 0.9 mm | 25 mm | Light Yellow |
| STERSNNDA12038 | 20G, 1.5″ (38 mm) | 0.9 mm | 38 mm | Light Yellow |
| STERSNNDA12125 | 21G, 1″ (25 mm) | 0.8 mm | 25 mm | Green |
| STERSNNDA12138 | 21G, 1.5″ (38 mm) | 0.8 mm | 38 mm | Green |
| STERSNNDA12238 | 22G, 1.5″ (38 mm) | 0.7 mm | 38 mm | Black |
| STERSNNDA12325 | 23G, 1″ (25 mm) | 0.6 mm | 25 mm | Blue |
| STERSNNDA12338 | 23G, 1.5″ (38 mm) | 0.6 mm | 38 mm | Blue |
| STERSNNDA12425 | 24G, 1″ (25 mm) | 0.55 mm | 25 mm | Purple |
| STERSNNDA12525 | 25G, 1″ (25 mm) | 0.5 mm | 25 mm | Orange |
| STERSNNDA12613 | 26G, 0.5″ (13 mm) | 0.45 mm | 13 mm | Brown |
| STERSNNDA12713 | 27G, 0.5″ (13 mm) | 0.4 mm | 13 mm | Grey |
| STERSNNDA13013 | 30G, 0.5″ (13 mm) | 0.3 mm | 13 mm | Bright Yellow |
Note: All specifications are provided for reference only. Minor variations may occur due to normal manufacturing tolerances. For graduated apparatus, the stated capacity, tolerance, accuracy and precision are based on the product specifications and, where applicable, the designated class.
